Home About us Editorial board Search Ahead of print Current issue Archives Submit article Instructions Subscribe Contact us Login 
  • Users Online:813
  • Home
  • Print this page
  • Email this page


 
 Table of Contents  
LETTERS TO THE EDITOR
Year : 2019  |  Volume : 7  |  Issue : 2  |  Page : 321-322

Propofol-compatible plastics or plastic-compatible propofol?


Department of Anaesthesiology, Government T D Medical College, Alappuzha, Kerala, India

Date of Submission15-Jul-2019
Date of Decision24-Aug-2019
Date of Acceptance26-Aug-2019
Date of Web Publication16-Dec-2019

Correspondence Address:
Varun Suresh
Department of Anaesthesiology, Government T D Medical College, Alappuzha, Kerala
India
Login to access the Email id

Source of Support: None, Conflict of Interest: None


DOI: 10.4103/amhs.amhs_101_19

Rights and Permissions

How to cite this article:
Suresh V. Propofol-compatible plastics or plastic-compatible propofol?. Arch Med Health Sci 2019;7:321-2

How to cite this URL:
Suresh V. Propofol-compatible plastics or plastic-compatible propofol?. Arch Med Health Sci [serial online] 2019 [cited 2020 Sep 29];7:321-2. Available from: http://www.amhsjournal.org/text.asp?2019/7/2/321/273042



Sir,

Propofol is a widely used intravenous agent in anesthesia and critical care practice. Apart from anesthetic utility, propofol provides considerable cerebral protection and antiepileptic activity by reducing cerebral metabolism and intracranial pressure.

Several cases of iatrogenic infections have been reported with contaminated propofol in both the outpatient and inpatient settings, as well as in both surgical and nonsurgical patients.[1],[2] The preservative-lipid emulsion of propofol supports microbial growth, which raises the risk of infection. Intrinsic and extrinsic microbiological contamination of propofol-lipid emulsions occurs – the former occurs due to environmental exposure at the point of manufacture and the latter occurs after opening the vial. Extrinsic contamination is the most frequent. Since its introduction, multiple antimicrobial agents have been added to propofol such as ethylenediaminetetraacetic acid (EDTA), sodium metabisulfite, lidocaine, and benzyl alcohol; however, the risk of extrinsic contamination remains the same. Water-soluble preparation of fospropofol disodium reduces the risk of infection, but due to the prolonged onset of action compared to propofol, this drug though Food and Drug Administration approved has not gained much appreciation and widespread use. The horizontal transmission of pathogens in anesthesia begins with the breach of handling precautions by anesthesia providers of devices or drugs. Frequently neglected precautions during the induction and maintenance of anesthesia include hand hygiene and protection against incidental propofol contact with the environment.

Zorrilla-Vaca et al.,[3] in their epidemiologic analysis of propofol-related infections reported worldwide from 1989 to 2014, found infective microorganisms to be Staphylococcus aureus, Serratia marcescens, Candida albicans, and hepatitis C and hepatitis B viruses in the descending order. All the reports of propofol-related infections were from North America, Western Europe, and Australia, likely as a consequence of deficiencies of surveillance programs and poor data acquisition regarding the frequency of contaminated propofol in other regions.

Propofol dissolves and weakens some plastic components by nature of its design. It is stated that polycarbonate in medical-grade plastic interacts with propofol, resulting in leaks of components. Most of the medical-grade plastics used in three-way stopcocks, intravenous infusion sets, and syringes in use now are incompatible with propofol infusions. Some manufacturers of three-way stopcocks and syringes add a note of caution against the use of lipid solutions [Figure 1]. There are multiple reports of damage to plastic components of three-way stopcocks and infusion sets with the use of propofol.[4] Leaks along infusion line of propofol have been a frequent but often ignored occurrence in anesthesia practice. Such damage to plastic components is attributed to lipid vehicle of propofol; however, clear formulation of propofol has also been reported to produce cracks in three-way stopcocks.[5] Such leaks in infusion system components are a definite contributor to extrinsic contamination of propofol. Cracks in lipid infusion systems are reported as early as 20 min and up to 6 h of exposure to propofol. Apart from infection risk, concerns regarding human toxicity resulting from interactions between plastics and drugs or the solvents cannot be ignored.
Figure 1:Covering wrap of a commonly used three-way stop cock cautioning its incompatibility with lipids

Click here to view


The various advantages propofol offers in anesthesia and critical care practice cannot be ignored. Safe and infection-free drug delivery, especially for drugs with lipid vehicle, needs to be ensured. A vast majority of extrinsic propofol contamination and thereby postoperative sepsis in some cases, from intraoperative use of lipid incompatible stopcocks, syringes, and extension tubings, remain unaccounted and unattributed in our setting due to lack of adequate surveillance systems. Hence, apart from aseptic precautions in drug preparation and drug administration, compatibility of medical-grade plastics to drugs in lipid vehicles and vice versa needs to be assured.

Financial support and sponsorship

Nil.

Conflicts of interest

There are no conflicts of interest.



 
  References Top

1.
Bennett SN, McNeil MM, Bland LA, Arduino MJ, Villarino ME, Perrotta DM, et al. Postoperative infections traced to contamination of an intravenous anesthetic, propofol. N Engl J Med 1995;333:147-54.  Back to cited text no. 1
    
2.
Chen SH, Kung CC, Fung ST. Endotoxemia due to propofol contamination in four consecutive patients. J Formos Med Assoc 2014;113:328-9.  Back to cited text no. 2
    
3.
Zorrilla-Vaca A, Arevalo JJ, Escandón-Vargas K, Soltanifar D, Mirski MA. Infectious disease risk associated with contaminated propofol anesthesia, 1989-2014(1). Emerg Infect Dis 2016;22:981-92.  Back to cited text no. 3
    
4.
Nakao M, Yamanaka S, Iwata M, Nakashima M, Onji I. The cracks of polycarbonate three-way stopcocks are enhanced by the lubricating action of fat emulsion of propofol. Masui 2003;52:1243-7.  Back to cited text no. 4
    
5.
Puri GD, Singh KP. Damages to the three-way valves by a clear propofol formulation. Anesth Analg 2004;98:1193-4.  Back to cited text no. 5
    


    Figures

  [Figure 1]



 

Top
 
 
  Search
 
Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
Access Statistics
Email Alert *
Add to My List *
* Registration required (free)

 
  In this article
References
Article Figures

 Article Access Statistics
    Viewed374    
    Printed28    
    Emailed0    
    PDF Downloaded90    
    Comments [Add]    

Recommend this journal


[TAG2]
[TAG3]
[TAG4]